This 1080p HD video camera with wide angle lens has been developed to be small and light enough for many applications that require a high performance camera including mounting to a divers helmet.

Machined from solid Titanium, the housing has immunity to corrosion during long term immersion in seawater and with a scratch resistant window this camera is well suited to the demands of commercial diving.

A built in voltage regulator alows operation from supplies ranging between 13 and 30 volts dc.

The HD-TVI video signal provides exceptional picture quality over cables in excess of 200 metres long. (Optionally, the camera can be supplied with an HD-AHD video output in place of HD-TVI)

Externally, the HD-FC is identical to the DHC-5 and can use the same underwater cables (with slight wiring change in Amphenol connector) although display and recording will require HD-TVI specific equipment. (soon to be a Submertec option)

Provision has been made in the design to accommodate a variety of small underwater connectors including Jupiter size 10, MCBH4 or a moulded penetrator and tail to LPIL4M or IL4M etc.

If disconnection at the camera is not required, the underwater cable can be moulded directly to a straight or right angled penetrator

 

HD-FC SPECIFICATION

Dimensions	29mm diameter (1.2 in), 115mm long (4.5 in)
Weight	182gm (6.5oz) in air 106gm (3.7lb) in water
Depth Rating	305 Metres (1000 feet)
Material	Titanium
Resolution	1080p HD video @ 25 or 30Hz
Light required	1 Lux minimum light
Field of View75	degrees horizontal in water
Power Supply	13 to 30 volts dc @ 100mA
Video Output	HD-TVI
Video option	HD-AHD
Connector options	Most connectors can be supplied on request

---

HD-FC with lens preset to very close focus for use in a wildlife centre"touch pool"

The HD-FC was positioned approx 2cm from a wrist watch and displayed on a 48" weatherproof Screen.

Picture taken using a mobile phone camera. Right click and open image in new tab to expand.