| |
 |
| |
| Weighing only 11
Kg and housed in a durable yellow Polypropylene case, this unit provides
the ultimate in portable controllers for our Seaspy underwater video cameras
and lights. |
| |
 |
Very
portable at only 11kg |
|
Weatherproof
when closed |
|
15 inch
Colour LCD Display |
|
Digital
8 Video Recorder |
|
Controls
for camera focus & power |
|
100
Watt variable intensity light supply |
|
Connection
for microphone |
|
Built
in audio speaker |
|
External
Video Typewriter socket |
|
Composite
video and Firewire outputs |
|
Operation
from 95 to 250 volts AC |
| |
|
| A
15 inch colour active matrix TFT LCD display mounted in the
case lid behind a scratch resistant Polycarbonate window displays
a clear and bright image from any of Submertecs` Seaspy cameras.
This display has a wide viewing angle, which allows the picture
to be viewed by several people at once during recording and
playback. |
|
|
 |
|
| |
 |
|
A Sony Digital
8 video recorder built into the panel has Composite Video and
Firewire connections provided for post survey editing and copying
without sacrificing quality. Large panel mounted control buttons
for Stop, Pause and Record have been added to simplify operation
during surveys.
Date and
Time are automatically recorded on the tape and can be superimposed
on the display either immediately or during playback.
When required,
a Video Typewriter can be connected to a socket on the panel to
superimpose text on the screen.
|
|
| |
| |
| |
 |
| |
|
The Seaspy
Model B3 controller provides power and control of an underwater
video camera and light in a rugged, lightweight and easy to operate
package. Housed in an attractive power coated, extruded aluminium
case with wipe clean membrane front panel, this unit is ideal
for use in dive control rooms or mobile units where space is at
a premium.
This unit
is compatible with all Submertec cameras and outputs can be configured
for use with cameras from most other manufacturers. For maximum
flexibility in use, the video amplifiers within the unit can be
set for normal or balanced line operation to enable use with either
coaxial or twisted pair cables.
|
|
 |
A camera on / off
button on the front panel controls the camera supply which can be internally
preset to suit the camera type and cable length, with provision to set
constant voltage, constant current or current limit as required. Focus
control is also provided on the front panel for use with variable focus
cameras. Lamp supply can be preset to power a 12 or 24 volt lamp at
up to 100 Watts and the output can be preset to a maximum of 30 volts
to allow for losses in long cables.
Buttons on the
front panel allow the lamp to be switched on / off and intensity varied
from maximum brightness to a low level. All connections are to the rear
panel which is split to allow a section to be opened for set-up and
adjustment. Two independent BNC video outputs are provided to allow
additional monitors to be connected if required.This controller is intended
to provide basic camera and lamp only functions at minimum cost.
|
| |
| |
 |
| |
| Dimensions |
233mm
wide, 133mm high and 304mm deep (case closed) |
| Weight |
4kg |
| Power supply |
85
to 132 or 170 to 264 VAC (automatic selection) |
| Camera power |
Adjustable
up to 22 volts DC with current limit |
| Lamp power |
Adjustable
up to 30 volts DC with 100 watt lamp |
| Lamp control |
Variable from front
panel down to 15 volts |
| Video input |
Normal or Balanced |
| Video
Output |
Adjustable
level with 2 independent buffered outputs |
| Umbilical
connection |
Amphenol
97-3106-18-1P (required on cable end) |
|
| |
| |
| |
 |
| |
 |
|
The Seaspy
Model EVC-1 controller provides power and control of an underwater
video camera and light in a rugged, lightweight and easy to operate
package. Housed in an attractive power coated, extruded
Aluminium case, this unit is ideal for use in dive control rooms
or mobile units where space is at a premium.
This unit
is compatible with all fixed focus cameras from Submertec and
constant voltage cameras from
most other manufacturers.
|
|
| |
A camera On / Off
switch on the front panel controls the camera supply which is preset to
18 volts
to suit most modern cameras and moderate cable lengths. |
| |
|
An On / Off
switch on the front panel together with a dimming control and
level indicator provides intuitive control of an underwater light.The
light power supply can drive a 12 or 24 volt lamp at up to 100
Watts and the output can be preset on the rear panel to a maximum
of 30 volts to compensate for losses in long cables.
Submertec
can supply a complete underwater video system to complete the
package, including camera, lights, pistol grip, helmet mounts,
umbilicals, monitors etc.
|
|
 |
|
| |
| |
|
| |
| Dimensions |
246mm
wide, 96mm high and 245mm deep (case closed) |
| Weight |
3.25kg |
| Power supply |
85
to 132 or 170 to 264 VAC (automatic selection) |
| Camera power |
18
volts DC (internally adjustable 18-26 volts) |
| Lamp power |
Adjustable
up to 30 volts DC with 100 watt lamp |
| Lamp control |
Variable from front
panel down to 16 volts |
| Video input |
Standard
1v p/p video signal |
| Video
Output |
Single
un-buffered output on BNC connector |
| Umbilical
connection |
Amphenol
97-3106-18-1P (required on cable end) |
|
| |
| |
| |
 |
| |
| Housed in a weather
resistant (when closed) case, this unit contains everything needed to
carry out a video survey using one of our underwater camera, lamp and
cable sets. The Seaspy Model B2 controller provides control for camera
power, focus (if required) and variable light intensity. |
| |
 |
|
A Sanyo TLS224
video recorder set into the panel offers an on-screen date &
time function, optional time lapse recording up to 12 hours and
uses standard VHS tapes. Pictures
are displayed on the built in 10 inch colour monitor during recording
and playback with a video output routed to the front panel for
connection of an additional monitor if required.
A microphone
socket and built in amplified speaker complete this versatile
control unit. Power required for operation is from 95 to 250 volts
AC at up to 3 Amps.
|
|
| |
| |
|
| |
| Dimensions |
610mm
long, 355mm wide and 44mm deep (case closed) |
| Weight |
29kg
(64lb) |
| Power supply |
95 to 250 volts
AC at 3 Amps |
| Display |
10 inch colour monitor |
| Controls |
Camera power, focus
and variable light |
| VCR |
Sanyo TLS224 VHS |
| Outputs |
Video |
|
| |
| |
| |
 |
| |
| No
longer in production |
| |
|
The Seaspy Model
C controller forms the heart of a rugged, high quality, underwater video
system by providing control and display of an underwater camera with
associated light. Housed in an attractive case that can be sealed to
IP 65 for shipping or storage and opened on site for use, this unit
is equally at home in mobile systems or dive control rooms.
Where more permanent
installation is required, the unit can be removed from its case and
mounted in a standard 19 inch rack. Control buttons are grouped in a
logical arrangement and are clearly marked on the membrane front panel
for ease of use. A camera on / off button on the front panel controls
the camera supply which can be internally adjusted if required to suit
other camera types or extreme cable lengths, with provision to set constant
voltage, constant current or current limit as required.
|
| |
|
Focus control
is also provided on the front panel for use with variable focus
cameras. Brightness control of underwater lights at up to 300
watts is variable from zero to 120 volts AC and safety protection
is provided by isolation transformer and Line Insulation Monitor
(LIM) with trip.
A basic text
generator is built in which provides date, time and 2 pages of
up to 3 lines of text for immediate insertion at the touch of
a button. (ie: Company name, Job Number etc.) For more advanced
use, a socket is provided on the front panel for connection of
an external video typewriter. Connections on the front panel make
connection of a video recorder easy, with video and audio being
routed back to the built in colour monitor for display during
recording and playback.
|
|
 |
|
| |
| |
|
| |
| Dimensions
in transport case |
482mm
wide, 266mm high, 400mm deep |
| Rack mount
size |
Standard
6U high 19 inch rack mounting |
| Weight including
case |
21kg |
| Power source |
110,120,220 or 240
volts AC at 50 or 60 Hz (450VA) |
| Camera power |
Adjustable up to
22 volts DC with current limit |
| Lamp power |
300 watt. Adjustable
from 0 to 120 volts AC |
| Video display |
9 inch colour monitor |
| Video
/ Audio connections |
Video out, Video and Audio in |
| Video
Text features |
Date,
Time & up to 3 lines of text plus external typewriter |
| Video
standard |
Composite
video PAL and NTSC compatible |
| Umbilical
connection |
Amphenol
97-3106-18-1P (required on cable end) |
|
| |