| |
| |
| |
 |
| |
 |
|
Manufactured
primarily for the commercial diving industry, this low light colour
camera has been designed to provide the best possible image in
a rugged and reliable Titanium housing suitable for mounting to
a divers helmet or pistol grip.
The
camera uses digital signal processing to produce a clear image
with good colour balance and its extreme low light performance
coupled with an automatic iris lens allows it to operate over
extremes of light levels including the observation of welding
and burning.
Adjustment
points inside the housing allow the camera to be set up for use
with coaxial or twisted pair cables up to 1000 metres long (3280ft)
and Video outputs are fully protected against damage from line
transients.
|
A
voltage regulator with reverse polarity protection is provided to allow
the camera to operate from supplies
ranging from 15 to 30 volts dc. The
LPIL4MP connector on a short cable tail, is moulded to a right angle
penetrator on the camera end cap for maximum durability and minimum
wastage of space on a divers helmet. Other underwater connectors can
be fitted on request to ensure compatibility with other equipment.
|
In
recognition of the harsh environment that the camera is designed
to work in, many parts have been made field replaceable including
the pressure window and penetrator assembly.
The
new Guardian UVL-2 Titanium underwater video light has been specially
designed to complement Submertec Seaspy underwater cameras.
|
|
 |
|
| |
| |
| Dimensions |
56mm
diameter (2.2 in), 130mm long (5.1 in) |
| Weight |
734gm (1.6lb) in air 425gm (0.9lb)
in water |
| Depth rating |
305 Metres (1000 feet) |
| Material |
Titanium
(Other materials on request) |
| Resolution |
More than 480 TV lines |
| Light required |
0.2 Lux minimum light |
| Lens Type |
4.0mm f1.2 automatic iris, fixed
focus |
| Outputs |
Composite video - Normal and balanced |
| Adjustment |
Video level and long line compensation |
| Video options |
PAL or NTSC |
| Connector options |
Most connectors can be supplied on
request |
|
| |
| |
| |
 |
| |
|
Manufactured for
general purpose underwater use, this camera has been designed to provide
high performance at an economic price by eliminating features that are
often not required. Its small size and rugged design makes the ECC-1
ideal for use in many situations including divers helmet cameras, underwater
vehicles and manipulators.
The camera offers
very high image resolution and its exceptional low light performance
will often provide a good image in ambient light without the need for
artificial lighting. An adjustment point inside the housing allows the
video level to be set up for use with coaxial cables up to 500 metres
(1600 feet) long. A voltage regulator with reverse polarity protection
is provided to allow the camera to operate from supplies ranging from
13 to 30 volts dc.
|
| |
 |
|
The MCIL4MP
connector on a short cable tail, is moulded directly to the camera
end cap for maximum durability and minimum wastage of space. Most
other underwater connectors can be fitted on request to ensure
compatibility with other equipment. In recognition of the harsh
environment that the camera is designed to work in, many parts
have been made field replaceable including the pressure window.
All Seaspy systems are sold with a 12 Months warranty that can
be extended annually as required.
|
|
| |
| |
| |
| Dimensions |
50mm
diameter (2.0 in), 123mm long 4.9 in) |
| Weight |
450gm (1.0lb) in air 210gm (0.5lb)
in water |
| Depth rating |
300 Metres (984 feet) |
| Resolution |
More than 480 TV lines |
| Light required |
0.2 Lux minimum light |
| Lens Type |
4.0mm f1.2 fixed focus. Camera set
to Electronic Iris |
| Outputs |
Composite video |
| Adjustment |
Video level |
| Video options |
PAL or NTSC |
| Connector options |
Most connectors can be supplied on
request |
|
|
|
| |
